01372 940128
FREE Delivery
VAT Included
Bulk Discounts
10 Year Warranty
Rated Excellent on TrustSpot
1500mm Anthracite Grey / White UPVC Sliding Patio Door
£1,023.00
1500mm Anthracite Grey UPVC Sliding Patio Door
£1,090.00Assessing the Problem
Before you can fix your patio door, you need to understand what the problem is. The most common issue with patio doors is misalignment, which results in difficulty opening and closing the doors. Misaligned doors also let cold air and draughts come into your house, negatively impacting energy efficiency. To identify whether your door needs vertical or horizontal alignment, start by observing how it operates. When you open and close your door, does it move smoothly along its tracks? If not, it might need alignment.
If you suspect vertical misalignment is contributing to the problem, check the height of the sliding panels on either side of the track carefully. Using a level and adjustment screws located at bottom corners of each panel will ensure they are level with each other- making sure that both pieces are even is key for proper function as well as preventing future damage….
Adjusting Vertical Alignment
Adjusting the vertical alignment of your patio doors involves adjusting the height of the individual panels. To do this, locate the adjustment screws at the bottom corners of each panel. Using a screwdriver, turn each screw clockwise or counterclockwise as needed to raise or lower that corner of the door.
Once you’ve made your adjustments, use a level to verify that both panels are even with one another and not tilting in any particular direction. Small adjustments may need to be made on one side or the other until both panels are completely level.
It’s essential to ensure that both panels are correctly aligned for optimal operation and a weather-tight seal when closed. Be patient and take your time making these adjustments so that you get it right the first time around.
Horizontal Alignment Adjustments
If you notice that your patio door is sticking when you try to slide it open or shut, then it’s probably a horizontal alignment issue. When this happens, one panel of the door will be higher than the other. This problem can be fixed by repositioning the edges of the problematic sliding panel within the frame.
To do this, loosen the fasteners around the side of your door with the problematic panel. Make sure not to force anything as that might cause more damage and difficulties while trying to fix it later. Gently slide or wiggle that panel upward or downward until they are even with each other. Then, tighten those fasteners back up once everything is aligned correctly.
Remember! Make small adjustments slowly so that you don’t accidentally over-correct or misalign your patio door frames again; sometimes little goes a long way! Now your door should open and close smoothly without any trouble.<\p>
Addressing Track and Roller Problems
Keeping your patio door’s tracks and rollers clean is essential for its operation. Over time, dirt, dust, and debris can accumulate in the tracks, causing doors to drag or not slide at all. We recommend using a soft brush or vacuum cleaner attachment to remove any debris from the track. Be sure to clear any remaining particles by wiping them off with a damp cloth. You should also ensure that the tracks are dry before moving on to the next step.
To ensure that your patio door slides smoothly, lubrication of the track is necessary. We suggest using silicone-based lubricant because it lasts longer than traditional oil-based alternatives and doesn’t attract dirt as easily as grease. You can apply it generously to the track’s entire length using a clean rag. Afterward, slide your door back and forth several times so that it spreads evenly over the whole track surface.
If you’ve followed all these steps but still have trouble with your patio door’s rollers, you may need to change them out. Damaged or worn-out rollers can cause friction which will affect smooth sliding action of your patio door. Many hardware stores stock replacement rollers made of steel or nylon with various roller diameters for different configurations depending on your needs.
Upgrading Door Hardware: Adding Style and Security to Your Home
The hardware on your doors can have a significant impact on the overall look and security of your home. You can switch or upgrade door hardware for both interior and exterior doors as part of your DIY projects. With so many designs, styles and materials available, you are guaranteed to find something that matches your taste.
When it comes to exterior doors, safety is often a priority. Consider investing in high-quality deadbolts, knob locks, or handlesets with double cylinder deadbolts to enhance security around the entry points of your home. Smart locks are also an increasingly popular option that allows for remote access control.
On the other hand, interior door hardware can make a statement about inner room decor. You could swap out old knobs for modern or classic styles, install levers for ease of use or replace hinges with ones that match new finishes. It’s important to carefully select materials such as brass, stainless steel or bronze depending on what’s most practical.
All in all, upgrading door hardware is an excellent way to complete a simple DIY project while improving the aesthetics and protective features of your home. Keep in mind that this task requires not only choosing complimentary styles but understanding lock grades based on home requirements too.